Information for all Big Pond Steam and/or SteamWatch users.
Warning: This is a bit involved but it might save you from going over your monthly limit and getting capped. Here goes
I was tooling around with my internet connection, trying to work out how I used 7GBs of my 12GB downloading the Witcher earlier this month when I found a third Big Pond GameArena Steam content server.
OK, so what?
For SteamWatch 3 users, the app only comes pre-configured for TWO Big Pond Steam servers:
203.46.104.7 and
203.46.104.8
The third server's IP address is:
203.39.198.167
I reverse-pinged the IP address and it resolved to this hostname:
Pinging ga2.gamearena.com.au [203.39.198.167] with 32 bytes of data:
That looks like a GameArena server to me.
This third content server has content that isn't on the other two. I know this because after adding the server's address to the 'Whitelist' section of my SteamWatch settings file, I downloaded the remaining 3Gig of The Witcher without incurring any additional cost to my monthly download, therefore the content must have been on the third server.
So. How to add the server to your SteamWatch Whitelist or list of IP addresses to allow?
Go into your Start Menu and make sure you have the SteamWatch Tray app running. Once you see it in your System Tray, just right-click and select 'Edit SteamWatchSettings.xml'. This should open up Notepad so you can make changes to the settings.
Down the bottom of the file, under the heading:
<!--List of IP addresses to allow-->
<whiteList>
you'll see these two IP addresses:
<address>203.46.104.7</address>
<address>203.46.104.8</address>
Just add this line anywhere between
<whiteList>
and
</whiteList>
Mine looks like this:
<whiteList>
<address>203.46.104.7</address>
<address>203.46.104.8</address>
<address>203.39.198.167</address>
</whiteList>
Hope this helps someone.
SteamWatch Software Informer: version 3.0 information