Old 23rd April 2009, 07:56 PM   #11 (permalink)
Deadly - Post: 1464
 click's Avatar

Goofy
Default

Quote:
Originally Posted by Pure Mongrel View Post
Oh yeah, the SONY console is way more stable and sturdy compared to the XBOX ....
Sry mate I forgot
Here is the list for the xbox people
LOL plus the secondary errors codes (yes there is that many they need a secondary list )

I also added the bit about sending your console back

Section 4 is flashing red

- Hardware Failure
/ \
\ /


The Specific Type of hardware failure can be determined by the error code displayed on the screen.
If the screen is blank or you would like additional information follow the instructions for determining the secondary error code in the section below
E45: Unknown (possibly dashboard update related)

E64: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc.

E65: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc. This can also be caused by the tray not being fully closed on boot.

E66: DVD Drive Error: DVD model, or version does not match that of the version expected by the dashboard. OR the firmware version on the drive is older then the firmware version expected by the dashboard. Make sure the DVD drive is of the same version originally included with the console and that it is using either the original firmware included with the console or newer.

E67: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it

E68: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it, This can also be caused by a Hard Drive Eprom Error. Some also believe this might be caused by a problem with the fans.

E69: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it

E71: possibly a dashboard update error, Check below in the "Console Reset Codes" for instructions. If that does not work there is no other solution and the console must be sent back to MS for repair.

E72: (not yet known)

E73: General Hardware Error: Ethernet port... this error is caused by a problem with the Ethernet port.

E74: AV cable error... There is a problem with the AV cable, try using a different AV cable. If the cable is known to be working then there is a 90% chance it's a scaler chip problem (the "ANA" or "HANA" chip connected directly to the AV cable) in rare cases it is the GPU.

E76: (not yet known)

E79: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it

=============================

--==SECONDARY ERROR CODES==-
The specific type of hardware failure can be determined by a "hidden" error code
  • Turn the xbox 360 on, and wait till the 3 red lights are flashing.
  • Press and hold the sync up button (the small white one), while holding that button press the eject button.
  • The LEDs will now blink the first number in the code (as described below).
  • Release the eject button and press it again.
  • The LEDs will now blink the second number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the third number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the forth number of the code.
  • Release the eject button and press it again.
  • The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:
  • All four lights flashing - 0
  • One light flashing - 1
  • Two Lights flashing - 2
  • Three lights flashing - 3

0001 power supply problem
0002 Network Interface problem
0003 Power problem could be the PSU could be the GPU/CPU, somehow the console isn't getting clean power from the power supply.
0010 over heating
0011 over heating - If you are receiving this error after disassembling your console make sure to all 8 of the heatsync screws are tightened securely to the board/heatsink holes.
0012 over heating
0013 over heating
0020 (Not yet known, possibly overheating)
0021 DVD Drive Time out - Can be caused by problems with a firmware flash. This is also speculated to sometime be caused by a problem with the southbridge chipset on the motherboard.
0022 GPU Error / GPU Overheating
0023 (not yet known)
...
0101 (not yet known)
0102 unknown error
  • though it's most likely GPU related literally means the console does not know what is wrong. possibly a short or cold solder joint somewhere. So far there is 1 major theory for what causes most of these errors is that the Ram, CPU, or GPU are not soldered properly to the mother board due either to poor manufacturing or excessive heat up and cool down cycles that stress, weaken and eventually break the soldered connection.
    There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced. I have also heard of limited success by simply switching the AV cable from "HDTV" mode to "TV" mode.
0103 CPU Error/ CPU Overheating - see solution for error 0102
0110 Memory Error / Memory Overheating - see solution for error 0102
...
0200 (not yet known)
...
1000 (not yet known)
1001 (not yet known)
1002 (not yet known)
1003 Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it
1010 Hard Drive Error, Can be caused buy a corrupt or missing eProm.
1011 (not yet known)
1012 (not yet known)
1013 (not yet known) possibly a dashboard update error
1020 (not yet known)
1021 (not yet known)
1022 AV cable error... There is a problem with the AV cable, try using a different AV cable. (could also be a problem with the encoder chip)
1023 DVD drive not connected, connect DVD drive to boot
1030 (not yet known)
1031 (not yet known)
1032 (not yet known)
1033 (not yet known)
...
1444 and up There is no "4" in the error codes four lights is a "0" go back and check your code again.

=============================
--==Console Reset Codes==--
Clear All Installed Game Updates and Console Cache
  1. Go to the "system" blade
  2. Select "memory"
  3. Press Y on the HD symbol
  4. Press X,X, Left Bumper, Right Bumper, X,X
  5. A message will appear saying: "Do you want to perform maintenance on your Xbox 360 storage devices?"
  6. Select Yes
Clear Any Failed system updates that cause the console to error.
  1. With the console off, press and hold the sync up button (the small white one)
  2. While holding the sync button press the power button to turn on the console
  3. Continue to hold the sync button until the Console has booted up completely.
  4. During the boot process the console should clear any failed updates, allowing you to use it normally.
=============================
--==Sending in your Console for Repair==--
If none of the above suggestions work, contact MS customer support get get a support ticket started. If your console is still under warranty DO NOT attempt to open it and fix it yourself. MS will fix it promptly and for free and if you open it you loose the free support.

Check the documentation that came with your Xbox 360 for contact information.

In the US Customer Support can be reached at 1-800-4-MY-XBOX (1-800-469-9269)
__________________

PC - TOG|Click PS3-PSN - clickaus Guild Wars 2 - clickaus.9170
click is offline   Reply With Quote

Old 23rd April 2009, 08:26 PM   #12 (permalink)
Retired Captain
Retired Captain
Deadly - Post: 2187
 George's Avatar

Fine
Default

I shouldn't laugh, but click's post is gold.

Even if you add them both together i bet the list for PC games is still 100 times bigger

*Walks away from thread trying to remain impartial being the DC*
__________________

George is offline   Reply With Quote
Old 23rd April 2009, 09:09 PM   #13 (permalink)
Average - Post: 184

Amused
Default

Ah, it's only a personal preference, if one likes the ONE LED Yellow Light Of Death or the MULTI-LED Red Ring Of Death.

I personally like the XBOX 360 RROD "international lightshow"-style. And it's 4X leds anyway
__________________
-
Zaxvien is offline   Reply With Quote
Old 24th April 2009, 12:39 PM   #14 (permalink)
Competent - Post: 342
 maggot_bag's Avatar

Dead
Default

will try 'disable media server' see if that works. the problem doesn't seem to be logging in; it's staying in. the network keeps logging me out. one was a criterion notice, and it said to check ethernet connection and firewall settings. i dont recall changing those from when things worked fine.

i can think of 4 possible causes that accured arround the time things went crazy.

1-- we had a sudden power outage when i was playing online.
not a 'Brownout' (named so, because they turn all electronic equipment to s#*T).
It turned off quick then turned back on an hour later.

2-- i enabled media server .

3-- experienced a lot of burnout glitches ie: my car going invisable and floating a van up into the sky . some friends claim such things 'corrupt the data'.
last time i did that the connection signed me out several times.

4-- i only have 1 ethernet cable to this part of the house. so the cable is often pulled out of one device(PC ) to put it in another(PS3) . the router is on through the whole 'proceedure'.
that may well come under the heading of 'dumb ass moves' but i have no choice as the router is downstairs where i cant access it.
sometimes the PS3 is on while the ethernet cable is being plugged in.(ok...i have no excuse for that last bit ).

Last edited by maggot_bag; 24th April 2009 at 12:58 PM.
maggot_bag is offline   Reply With Quote
Old 24th April 2009, 06:34 PM   #15 (permalink)
Retired Captain
Retired Captain
Elite - Post: 4349
 Pure Mongrel's Avatar

Goofy
Default

Quote:
Originally Posted by click View Post
Sry mate I forgot
Here is the list for the xbox people
LOL plus the secondary errors codes (yes there is that many they need a secondary list )

I also added the bit about sending your console back

Section 4 is flashing red

- Hardware Failure
/ \
\ /


The Specific Type of hardware failure can be determined by the error code displayed on the screen.
If the screen is blank or you would like additional information follow the instructions for determining the secondary error code in the section below
E45: Unknown (possibly dashboard update related)

E64: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc.

E65: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc. This can also be caused by the tray not being fully closed on boot.

E66: DVD Drive Error: DVD model, or version does not match that of the version expected by the dashboard. OR the firmware version on the drive is older then the firmware version expected by the dashboard. Make sure the DVD drive is of the same version originally included with the console and that it is using either the original firmware included with the console or newer.

E67: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it

E68: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it, This can also be caused by a Hard Drive Eprom Error. Some also believe this might be caused by a problem with the fans.

E69: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it

E71: possibly a dashboard update error, Check below in the "Console Reset Codes" for instructions. If that does not work there is no other solution and the console must be sent back to MS for repair.

E72: (not yet known)

E73: General Hardware Error: Ethernet port... this error is caused by a problem with the Ethernet port.

E74: AV cable error... There is a problem with the AV cable, try using a different AV cable. If the cable is known to be working then there is a 90% chance it's a scaler chip problem (the "ANA" or "HANA" chip connected directly to the AV cable) in rare cases it is the GPU.

E76: (not yet known)

E79: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it

=============================

--==SECONDARY ERROR CODES==-
The specific type of hardware failure can be determined by a "hidden" error code
  • Turn the xbox 360 on, and wait till the 3 red lights are flashing.
  • Press and hold the sync up button (the small white one), while holding that button press the eject button.
  • The LEDs will now blink the first number in the code (as described below).
  • Release the eject button and press it again.
  • The LEDs will now blink the second number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the third number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the forth number of the code.
  • Release the eject button and press it again.
  • The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:
  • All four lights flashing - 0
  • One light flashing - 1
  • Two Lights flashing - 2
  • Three lights flashing - 3

0001 power supply problem
0002 Network Interface problem
0003 Power problem could be the PSU could be the GPU/CPU, somehow the console isn't getting clean power from the power supply.
0010 over heating
0011 over heating - If you are receiving this error after disassembling your console make sure to all 8 of the heatsync screws are tightened securely to the board/heatsink holes.
0012 over heating
0013 over heating
0020 (Not yet known, possibly overheating)
0021 DVD Drive Time out - Can be caused by problems with a firmware flash. This is also speculated to sometime be caused by a problem with the southbridge chipset on the motherboard.
0022 GPU Error / GPU Overheating
0023 (not yet known)
...
0101 (not yet known)
0102 unknown error
  • though it's most likely GPU related literally means the console does not know what is wrong. possibly a short or cold solder joint somewhere. So far there is 1 major theory for what causes most of these errors is that the Ram, CPU, or GPU are not soldered properly to the mother board due either to poor manufacturing or excessive heat up and cool down cycles that stress, weaken and eventually break the soldered connection.
    There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced. I have also heard of limited success by simply switching the AV cable from "HDTV" mode to "TV" mode.
0103 CPU Error/ CPU Overheating - see solution for error 0102
0110 Memory Error / Memory Overheating - see solution for error 0102
...
0200 (not yet known)
...
1000 (not yet known)
1001 (not yet known)
1002 (not yet known)
1003 Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it
1010 Hard Drive Error, Can be caused buy a corrupt or missing eProm.
1011 (not yet known)
1012 (not yet known)
1013 (not yet known) possibly a dashboard update error
1020 (not yet known)
1021 (not yet known)
1022 AV cable error... There is a problem with the AV cable, try using a different AV cable. (could also be a problem with the encoder chip)
1023 DVD drive not connected, connect DVD drive to boot
1030 (not yet known)
1031 (not yet known)
1032 (not yet known)
1033 (not yet known)
...
1444 and up There is no "4" in the error codes four lights is a "0" go back and check your code again.

=============================
--==Console Reset Codes==--
Clear All Installed Game Updates and Console Cache
  1. Go to the "system" blade
  2. Select "memory"
  3. Press Y on the HD symbol
  4. Press X,X, Left Bumper, Right Bumper, X,X
  5. A message will appear saying: "Do you want to perform maintenance on your Xbox 360 storage devices?"
  6. Select Yes
Clear Any Failed system updates that cause the console to error.
  1. With the console off, press and hold the sync up button (the small white one)
  2. While holding the sync button press the power button to turn on the console
  3. Continue to hold the sync button until the Console has booted up completely.
  4. During the boot process the console should clear any failed updates, allowing you to use it normally.
=============================
--==Sending in your Console for Repair==--
If none of the above suggestions work, contact MS customer support get get a support ticket started. If your console is still under warranty DO NOT attempt to open it and fix it yourself. MS will fix it promptly and for free and if you open it you loose the free support.

Check the documentation that came with your Xbox 360 for contact information.

In the US Customer Support can be reached at 1-800-4-MY-XBOX (1-800-469-9269)
Well ... At least it looks cooler!!! ... (Wait no it doesn't ... DAMN .... umm)

Well ... At least it plays HD DVD's! (Wait only if you by the HD DVD drive ... oh and that format is now defunct .... DAMN ... ummm )

Well ... At least it has the Master Chief! (Yeah that got him! HAHAHAHAHAHA ... ummm .... cough ..... hangs head, slinks off stage left ... )


Truth of the matter is, there is no such thing as an error free console. I like both consoles, but I am duty bound as XBOX squad leader to counterbalance the SONY fan boys
__________________

Last edited by Pure Mongrel; 24th April 2009 at 06:41 PM.
Pure Mongrel is offline   Reply With Quote
Old 26th April 2009, 12:50 AM   #16 (permalink)
The Caretaker
Console Forum Manager
Ace - Post: 9182
 Ancient_One's Avatar

Breezy
Default

Quote:
Originally Posted by Pure Mongrel View Post
Well ... At least it looks cooler!!! ... (Wait no it doesn't ... DAMN .... umm)

Well ... At least it plays HD DVD's! (Wait only if you by the HD DVD drive ... oh and that format is now defunct .... DAMN ... ummm )

Well ... At least it has the Master Chief! (Yeah that got him! HAHAHAHAHAHA ... ummm .... cough ..... hangs head, slinks off stage left ... )


Truth of the matter is, there is no such thing as an error free console. I like both consoles, but I am duty bound as XBOX squad leader to counterbalance the SONY fan boys

Epic fail.
__________________
Ancient_One is offline   Reply With Quote
Old 27th April 2009, 11:59 AM   #17 (permalink)
Competent - Post: 342
 maggot_bag's Avatar

Dead
Default

lol.... looks like everyones in top-form, and on their best behaviour in this thread .

Last edited by maggot_bag; 27th April 2009 at 02:01 PM.
maggot_bag is offline   Reply With Quote
Old 30th April 2009, 12:12 AM   #18 (permalink)
Retired Captain
Elite - Post: 2633
 Cadder's Avatar

Default

Quote:
Originally Posted by Pure Mongrel View Post
Truth of the matter is, there is no such thing as an error free console. I like both consoles, but I am duty bound as XBOX squad leader to counterbalance the SONY fan boys
You were only relegated to that job 'cos Click beat you to the Sony spot. I'm tellin' ya, you shouldn't've let him challenge you to a Burnout Stunt Run for it....

Quote:
Originally Posted by Ancient_One View Post
Epic fail.
*snig*

Quote:
Originally Posted by maggot_bag View Post
lol.... looks like everyones in top-form, and on their best behaviour in this thread .
*snigsnig* Yeh, right. This mob?
__________________
Cad nominatim, CAD per professio, cad per vis.
(Click the .sig for my PSN portable ID)
Cadder is offline   Reply With Quote
Old 30th April 2009, 10:56 AM   #19 (permalink)
Competent - Post: 342
 maggot_bag's Avatar

Dead
Default

hey, cadder's back! ('grand master spam') . where u been lately ?
maggot_bag is offline   Reply With Quote
Old 30th April 2009, 11:01 AM   #20 (permalink)
Retired Captain
Elite - Post: 2633
 Cadder's Avatar

Default

Quote:
Originally Posted by maggot_bag View Post
hey, cadder's back! ('grand master spam') . where u been lately ?
ROFL! Grand Master Spam. I like that. +1 if I could.
I've been interstate, has to sort out some personal stuff to do with settlement of Mum's estate. She passed away last July.
That's also why I missed the Burnout Stunt comp
__________________
Cad nominatim, CAD per professio, cad per vis.
(Click the .sig for my PSN portable ID)
Cadder is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +11. The time now is 01:05 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0